| 1. | Study on ternary graft modification chloroprene rubber adhesive
三元接枝改性氯丁橡胶胶粘剂的研究 |
| 2. | Melt grafting modification of polypropylene by reactive extrusion
利用反应挤出的聚丙烯熔融接枝改性 |
| 3. | Progress of studies on grafting modification and application of lignosulfonate
木质素磺酸盐的接枝改性及应用研究进展 |
| 4. | Structure and thermal properties of silk fabrics with chemical graft modification
真丝织物化学接枝改性后的结构和热性能 |
| 5. | Study on titanium dioxide solid phase grafting modification with polystyrene by mechano - chemistry
钛白力化学法固相接枝聚苯乙烯改性研究 |
| 6. | Surface status and formation of ultrafine silicon dioxide after polymer grafting modification
聚合物接枝改性超细二氧化硅表面状况及形成机理 |
| 7. | Sem and sfm were used to observe the surface morphology of the membranes . after grafting modification , the surface of the plla membrane became rougher than the control membrane
采用sem和sfm考察了改性前后材料表面形貌的变化，结果表明接枝改性使得材料表面的粗糙度增大。 |
| 8. | Water contact angle measurement of the control and the modified plla membranes indicated that the hydrophilicity of the membrane was improved obviously after the grafting modification
Atr - ir和xps测试结果证明了接枝聚合的发生。接触角测试结果表明改性后plla膜表面的亲水性明显提高。 |
| 9. | This topic focused on the radiation effect on the uhmwpe fiber with electron beam ( eb ) radiation . and instron , sem , atr - ir , xps , epr , xrd et al were used to characterize the structure and properties of uhmwpe fiber before and after radiation treatmentand on this condition we probed into the grafting modification with eb radiation technology
本课题研究uhmwpe纤维的电子束辐照效应，运用电子强力机、扫描电镜( sem ) 、全反射红外( atr ? ir )光谱、 x射线光电子能谱( xps ) 、电子顺磁共振仪( epr ) 、 x射线衍射仪( xrd ) 、接触角和交联度测定等方法对uhmwpe纤维在电子束辐照作用下的主要结构与性能变化规律进行了表征和分析，在此基础上对运用电子束辐照技术进行uhmwpe纤维的表面接枝改性进行了探讨。 |
